Can the drainage problem of the car wash be solved by the garage floor?

With the improvement of living standards, many people have one or more cars in their families; 

and the cars are easy to accumulate dust after being used for a long time, so more and more people will go to the car wash, which requires a lot of water. 

Car washing, its drainage planning is very important, so what is the method of drainage on the ground of the car washing room? 

Let me introduce the drainage ditch and garage floor grille.

The car wash room can be drained by digging a drainage ditch. Everyone digs a drainage ditch according to the planning drawings. 

The depth of the drainage ditch can be determined according to the daily drainage volume of the car wash. 

Next, we use bricks to build supporting beams to support beams. 

The width is about 20 cm; the distance between the support beams is about 30 cm. 

When making the support beam, a groove should be left between the ground and the depth of the grating; we just lay the floor grille it.

If it is inconvenient to dig a drainage ditch in the car wash.

we can move all the ditch to the original floor, use the ground as the bottom of the ditch, build a support beam on the ground, lay a car wash grid on it, and make a gentle slope to facilitate entering and exiting the car.

The car washing garage flooring does not need to use tools or excavate the ground. 

It is easy to install and disassemble, and it is very suitable. New and old customers who need this product are welcome to contact Hanyin.