How to improve the car wash floor of the car wash environment?

The ultimate purpose of car wash grille laying is for personal use, so when choosing, good quality and durability are the primary considerations. There are two types of car wash grills on the market: plastic interlocking floor and fiberglass grilles.

These two car wash grills are currently the most used plastic splicing grilles. This is because the FRP grille not only has a relatively large initial investment but also the FRP grille synthesized with glass fiber and resin is prone to breakage after a period of use. 

Because it is a whole piece of laying, the later maintenance is very troublesome, and it can only be replaced as a whole.

Compared with FRP grating, the ditch-free type introduced by plastic interlocking flooring not only does not need to dig trenches but also saves a lot of expenses. It is connected by splicing buckles, which makes installation and maintenance extremely simple. 

Improve the dirty and messy car wash environment in the car washroom, and at the same time save costs greatly. The pure material of Hanyin car wash floor has good toughness and strong bearing capacity. Each grille is carefully produced, focusing on pure raw materials, just to bring customers a peace of Good grill.

1. Rich colors, three-dimensional geometric structure, good decorative effect, and designability

2. Using polymer plastic materials, the bearing capacity is super strong

3. The surface does not accumulate water, the friction coefficient is high, and the anti-skid effect is satisfactory to you

4. One-piece double-layer structure, no need to worry about the drainage system

5. The installation is convenient, fast, and simple, a single square meter can be installed in one minute

6. It has good corrosion resistance to weak acid and weak base and has no adsorption effect on grease

7. Indoor and outdoor, very wide range of use

The development of anything is inseparable from innovation. With the popularity of self-service car washes, the grille of the car washroom has also begun to slowly adjust to adapt to the development of the self-service car wash industry. 

The splicing grille has become the new favorite of the self-service car wash industry, and major self-service car washes have chosen to lay the splicing grille without grooving.

Laying car wash grilles in self-service car washes not only requires good quality and long service life but more importantly, good hydrophobicity and sand removal. Hanyin flooring experts have done all of these, and they have done it to the extreme.

The grille of the car washroom is easy to lay without digging grooves, and the surface arc design has a good hydrophobic effect. 

The grille can be kept 5/6 cm above the ground and can be cleaned once a year to a year and a half, which is convenient and time-saving, and adopts 100% pure virgin material, good quality, and strong bearing capacity, with imported color masterbatch and antioxidants, the color of the grille is transparent and bright. It is a very good special floor product for car washrooms.

Self-service car washes are mostly laid outdoors, often exposed to direct sunlight, and have very high requirements on the overall grille. When choosing, we must first identify the manufacturer and do a good job in testing and comparison.