What should you pay attention to when laying car wash garage floor tiles?

To choose a good car wash grille decoration, because it can save money, ensure stable and convenient use, ensure the required bearing capacity, and ensure the service life. 

The installation and laying of the garage floor is also very important, so how to design it when laying?

1. The depth of the trench, the depth of the trench is determined according to your drainage, and the recommended specification is 20-30 cm.

which is based on the number of car washes in your car wash every day.

2. The span of the trench, the interval between the support beam and the support beam is called the trench span, and the recommended plan specification for the trench span is about 30 cm.

so that the damage to the garage grille is small, and the service life is long.  

3. The supporting beam, the width of the supporting beam is recommended to be allocated as 20 cm in the scheme specification.

4. Groove, leave a groove between the ground and the ditch, which is convenient for laying the car wash grille. 

The depth of the groove is 38mm, and the thickness of the grille is also the standard 38mm, so that the grille is exactly equal to the ground after it is laid. 

A space of 5mm should be reserved near the trench, which will facilitate the placement and movement of the grille.

For example, if the parking space is 3m×5mm, the trench can be made into 3.01m×5.01m.

More and more car washes choose to lay car wash grilles to improve the level of the site. 

It is particularly important to choose a good car wash grille. If necessary, please contact Hanyin.