How to install Interlocking Garage Floor Tiles more beautifully?

Although the splicing grille has been widely used in many industries, especially in the car wash room.

there are still many people who are not clear about the installation and design, as well as the laying plan. The editor will give you a general introduction. one time:

If it is directly used in the car wash workshop, in order to facilitate the drainage of water and sediment, a narrow drainage trench needs to be excavated on the ground before laying the spliced garage grille. 

The width of the groove is 7 cm is better. The depth of the ditch depends on the actual situation. Generally, it is recommended to be 5-15 cm. 

It is enough to connect the excavated drainage groove with the sewer system.

Laying method:

1. Place the previous product along the corner of the wall. 

The two sides of the product are directly touching the walls on both sides, and the ring locks on both sides are facing outwards to facilitate the fastening of the products below.  

2. Keep the ring locks on both sides of the Interlocking Garage Floor Tiles facing outwards, extend to the right and down respectively, and open them in a fan shape.

3. Continue to lay according to the color of the drawings according to the above method, until the laying of the entire workshop is completed. 

When obstacles or walls are encountered, they may be temporarily placed. After the laying is completed, confirm the cutting plan.

The color of the splicing grille can be changed according to the decoration style. 

The layout of the ring parking space of the splicing grille can be designed in two or three colors according to the color of the storefront.